How To Clean Airsoft Gun

Introduction

Taking care of your airsoft gun is important for the performance and longevity of the gun. Cleaning an airsoft gun regularly helps in its smooth functioning, prevents jamming, keeps it free of dirt, and ensures that the gun is running efficiently. Through this article, we will look at 8-12 relevant topics which one must take into account while cleaning their airsoft gun.

1. Unloading and Removing the Magazine

This is the first and most important step when it comes to cleaning your airsoft gun. Not only should you make sure that you unload your airsoft gun, but you should also remove all ammunition from it. The magazine helps us know when the gun is ready for cleaning.

Popular Subtopic: Safety

It is important to practice safety while you are cleaning your gun. Make sure you are in a well-ventilated area, wear protective gear, such as gloves, and store all ammunition away from the airsoft gun in order to avoid any accidental firings.

2. Cleaning the Barrel

The barrel of an airsoft gun needs to be cleaned regularly in order to ensure accuracy when firing. A clean barrel ensures that the BB is accurately hitting its target and is not being obstructed by dirt build up. Start by using a cleaning rod to dislodge any dirt that is stuck in the barrel. Once that is done, you can go ahead and clean the barrel with a patch of cotton, soaked in a quality cleaning solution.

Popular Subtopic: Types of Cleaning Solutions

There are a variety of cleaning solutions available in the market which are specifically designed for cleaning airsoft guns. Make sure you use these solutions as they are non-abrasive and will not damage the inner workings of the gun. Some popular cleaning solutions are WD-40, silicone oil, and airsoft gun oil.

3. Cleaning Patches

After you have finished cleaning the barrel, it is important to apply some more cleaning solution to a patch of cotton and move it up and down the barrel to help absorb any dirt left behind. This is also a good way to lubricate the barrel of the gun.

Popular Subtopic: Types of Patch Material

When using patches, it is important to use soft patches in order to not damage the barrel of the gun. Cotton and microfiber are two of the most common types of patch material used for airsoft guns. Both are able to absorb dirt and are soft enough to not damage your gun.

4. Cleaning the Hop-up

The hop-up is the barrel of the gun which is responsible for providing the spinning force to the BB and ensures that it is travelling in a straight line towards the target. Over time, dirt and grime can build up on the hop-up system, making it inefficient. To clean the hop-up, you need to unscrew the hop-up chamber and use a cotton swab and a quality cleaning solution to gently clean the components of the hop-up system.

Popular Subtopic: Lubrication

Once you have finished cleaning the hop-up system, it is important to apply some lubrication to keep it in top condition. A silicone-based lubricant is the best for this purpose, as it is not too thick and will not damage the internal components of the hop-up system.

5. Cleaning the Gearbox

The gearbox is the heart of an airsoft gun and needs to be taken care of in order to ensure the gun is running efficiently. Start by unscrewing the gearbox and using a cotton swab and a quality cleaning solution, clean all the components thoroughly. Once the gearbox is clean, apply a liberal amount of lubricant to ensure that all the parts are moving freely.

Popular Subtopic: Different Types of Lubricants

When it comes to lubricating the gearbox, there are a few different types of lubricants that you can use. Popular ones include silicone spray, airsoft gun lubricant, and lithium grease. Make sure that you apply the lubricant liberally, but not too much as to cause any damage to the gearbox.

6. Reassembling the Gun

Once you have finished cleaning all the components of the gun, it is time to reassemble everything. Begin by reattaching the gearbox and the hop-up system. Once that is done, you can add the barrel and the magazine. Finally, you can reattach all the screws and bolts that you unscrewed.

Popular Subtopic: Troubleshooting

If you are having trouble reassembling the gun, there are a few steps you can take to troubleshoot any issues. First, make sure that all of the components are correctly installed and that none of the screws are missing. Second, check that all of the pieces are properly lubricated and that no dirt is obstructing any of the components. Finally, make sure that all of the hoses are connected properly.

Conclusion

Cleaning your airsoft gun regularly is essential for its performance and longevity. Make sure that you follow the steps outlined in this article in order to keep your airsoft gun running efficiently and in top condition. Taking the time to clean your gun regularly will also help you avoid any misfires or jams, and ensure that your gun is able to perform to its full potential.